Pick your truck before you pick the crew
Before you call for loading help, decide what will carry the load. A two-bedroom apartment with a couch, dresser, and twenty boxes needs a different truck than a four-bedroom house full of furniture. Walk through every room, including the garage and patio, and write down the large pieces.
A 10-foot truck suits studio and one-bedroom loads, a 16-foot truck handles two-bedroom homes, and a 22-foot box fits larger houses. Ask the rental company for a size guide and share your item list, so the truck is not so empty that fragile pieces shift. In Tucson, rental trucks book up around month-end and in August, when University of Arizona leases turn over, so reserve early.
The crew loads whatever is on the truck, so the truck is the starting point. If you show up with a smaller truck than the move needs, the crew may finish loading and leave you with no space for the last few boxes. Give the crew a clear picture of the load before the date so they can plan their time.
Plan for pads, straps, and boxes before loading

Furniture pads protect the pieces that matter most, and ratchet straps keep tall items from leaning during the drive. Ask the truck rental company whether pads and straps come with the truck. If they do not, buy or rent them so the crew can wrap a dresser, brace a tall bookcase, and keep boxes from shifting.
Boxes matter more than most people expect. If the boxes are overstuffed or half-empty, they are hard to stack, and the crew loses time rebuilding the load. Use uniform, sturdy boxes, keep the weight reasonable, and tape every seam before the crew arrives.
Do not forget small supplies. Packing tape, markers, and labels let you mark fragile boxes so the crew places them on top. If you plan to disassemble a bed frame yourself, bring the tools and put all screws in a labeled bag. The crew can move the pieces, but you should handle any disassembly that requires specialty tools.
Factor in travel time and the second stop
Labor is billed by the hour, and drive time between the two addresses counts. At Elegant Movers, crews are billed by the hour with a 3-hour minimum and 15-minute increments after that, and travel time or a flat trip fee is confirmed in the written estimate. Ask every company the same question, so you can compare estimates fairly.
Before booking, map the route from the pickup address to the drop-off and note anything the driver should know: narrow streets, steep driveways, gates, low branches, or a one-way street. A trip from Tucson to Marana or Vail can add real drive time, so ask how travel is billed. Our loading and unloading page explains how crews are booked.
Ask about minimums, inventory, and your date

Labor-only jobs usually have a minimum number of hours, so even a small move can take a crew for half a day. Ours is 3 hours. Tell the company exactly what you have, including furniture, appliances, boxes, and anything in a shed or garage, so the crew size matches the load.
Before the crew arrives, firm up the date and what is actually moving. A detailed inventory, every bed, bookcase, appliance, and box, makes the truck choice and labor estimate more realistic. If you are still deciding what goes, say so, and ask how that may affect the booking.
Be honest about access on the day you want. If the pickup is a third-floor walk-up, if the driveway is long and gravel, or if the HOA limits truck hours, say so. For a move from Tucson to Phoenix, about 115 miles up I-10, say that up front too, because the drive time changes the crew hours.
Send one clear request for your move
Put all the details in a single message instead of calling about the truck and then emailing about the date. A clear request includes the pickup address, the drop-off address, the date, the approximate number of boxes, and the large furniture pieces.
Photos help more than a long description. Take a picture of each room, the stairs, the entry door, and any large item that looks difficult to move. Attach the photos to your request so the office can see the same thing you see. If a table has leaves that come off or a sofa has a reclining mechanism, mention it.
If you are still unsure about truck size or the crew count, describe the move and ask for a recommendation. The office can suggest a practical plan based on the details you provide. The more specific you are, the fewer surprises you will face on moving day.
Review this checklist before you book
- Confirm the truck size with the rental company and share the dimensions with the office.
- List every large item, including appliances, patio furniture, and items in storage.
- Note stairs, elevators, narrow doorways, long driveways, and any parking restrictions.
- Ask how travel time between addresses is handled and whether there is a minimum.
- Decide who supplies pads, straps, boxes, tape, and the tools for any disassembly.
- Give a backup date if you have one and mention how flexible your schedule can be.
Ready to move? The same team that handles loading and unloading can also take care of the truck if a full local move fits your plan better. Visit our local moving services page to compare that option with labor-only help.

